• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Acid....

Share this page

JPSmit

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
OK Citric acid.

Picked this up on another forum and bought some concrete etch at the store as it was on sale.

24 hours later - should have taken a "before" but, it looked like the not cleaned one.

Looks brand new!

fusebox one.JPGfusebox two.JPG
 
It is probably obvious to all but me. Did you immerse the piece or just coat the contacts and let it it sit? Is neutrilizer needed or just tap water?
 
65_BRG_Sprite said:
It is probably obvious to all but me. Did you immerse the piece or just coat the contacts and let it it sit? Is neutrilizer needed or just tap water?
Click to expand...

threw it in a tub and let it soak overnight - then just rinsed with water.
 
What was the strength of the acid solution?
Tom
 
TomMull said:
What was the strength of the acid solution?
Tom
Click to expand...

some poured out of the bag and add water. seriously. probably 2-3 tablespoons and 2 or so cups of water.
 
JPSmit said:
some poured out of the bag and add water. seriously. probably 2-3 tablespoons and 2 or so cups of water.
Click to expand...

Good enough. Tom
 
JP, Thanks for that bit of info! :encouragement: Now I have to try it on an old one I have on the shelf. PJ
 
Back
Top