• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Metal [or maybe fiberglass] tonneau for Healeys

Editor_Reid

Moderator
Staff member
Platinum
Country flag
Offline
I wonder if anyone here knows of a source for a rigid half-tonneau for a Healey 100. It could be metal, it could be fiberglass, it could be plastic, I suppose.

It would be/could be painted body color. It would cover the passenger side of the cockpit opening.

Thanks for any leads.
 
D

Deleted member 19315

Guest
Guest
Offline
I wonder if anyone here knows of a source for a rigid half-tonneau for a Healey 100. It could be metal, it could be fiberglass, it could be plastic, I suppose.

It would be/could be painted body color. It would cover the passenger side of the cockpit opening.

Thanks for any leads.

That's weird I was day dreaming about making a rigid cover to do just this for my BN4. My idea is to sit a simple moulding within the cockpit trim located on shouldered studs that would replace some of the trim screws. It'd need holding in but maybe the turnbuckles would do that ok with a bit of thinking.

It would be quite easy to make a buck by building a frame from wood covering it in thin plywood geeting some curve for starength and aethetics. The buck could easily include the return edge to fit inside the cockpit. The buck would be finished and waxed to allow a mould to be taken . Then the mould could be used to turn out as may or as few rigid cockpit covers as necessary. I suspect that each model would need a different mould and a 1/2 cover ending behind the seats rather than covering the passenger side would be the most popular. If the edges had say a soft neoprene round them it would accommodate some variance in cockpit profile car to car and help keep out water. ????
 

vette

Darth Vader
Country flag
Offline
A Panelbeater/Metal Shaper could make one for you. Find a high end vintage hot rod shop. Also, as you probably know there are more than a few custom metal shapers who travel the country and beyond doing specialty work and giving seminars. Two names of experts that come to mind are Fay Butler in Massachusetts and Ron Covell in Freedom, Ca.
 

steveg

Yoda
Gold
Country flag
Offline
I wonder if anyone here knows of a source for a rigid half-tonneau for a Healey 100. It could be metal, it could be fiberglass, it could be plastic, I suppose.

It would be/could be painted body color. It would cover the passenger side of the cockpit opening.

Thanks for any leads.

Bill Hoyt has a beautiful metal one made by Ellery. Give him a call. He's in so cal.
 
Country flag
Offline
There's some chaps in Australia that have figured it out, maybe you should ask them?

Healey-Under-Construction-2.jpg
 

dougie

Luke Skywalker
Country flag
Offline
There's some chaps in Australia that have figured it out, maybe you should ask them?

Healey-Under-Construction-2.jpg

There's a chap in the USA that has figured it out. Maybe ask him, he's only a couple miles from you.

#466 Aluminum Tonneau.jpg
 

Michael Oritt

Yoda
Gold
Country flag
Offline
Metal tonneaus are certainly very cool looking but pose a definite safety risk of injury to the driver in case of collision, etc. They're specifically prohibited by most race organizations unless originally supplied by the manufacturers and then only for certain cars. Here's VRG's rule:

3.2.10.8. Rigid (metal, fiberglass, etc) tonneaus, covering the passenger compartment beside the driver, are not permitted, except the case of certain sports-racing cars which were originally so equipped (Jaguar D, Lotus XI LeMans). Fabric tonneau covers are allowed.

That said, have at it!
 

RAC68

Darth Vader
Offline
Hi Reid,

Although I don't have a source for a half-tonneau cover for your AH-100, I can't see making one out of fiberglass would not be that difficult. A while back, my Son chose a not so healthy orange '79 TR7 with a deteriorated red plaid interior. Taking one look at the car, I knew it would not be my favorite and decided to address its deteriorated issues when my Son was off at College. When away at school, I re-did both interior and exterior of the TR7 and also designed molded a tonneau cover to replace the ripped original vinyl top cover.

View attachment 47419 View attachment 47420 View attachment 47421

As you can see, the TR7's tonneau is larger and a little more complicated then the half-cover you are interested in acquiring. However, should you not find a vendor and be interested in doing one yourself, I would suggest you consider fiberglass and the creation of a relatively simple mold. I tried this only once but can say "I did" and had enjoyed the experience and still use the cover.

Just a thought,
Ray(64BJ8P1)
 
OP
Editor_Reid

Editor_Reid

Moderator
Staff member
Platinum
Country flag
Offline
Thanks Randy. I also got Steve’s email today and wandered through his website and was looking at the very same image a few hours ago.

"I'm thinking about it." (I know, uncharacteristic for me... :wink-new: )
 
D

Deleted member 19315

Guest
Guest
Offline
That Capesport offering looks epic, wonder if they do a BN4 equivalent or if someone would.....
 

BBH

Senior Member
Country flag
Offline
I am sure that if you speak with Steve he will come up with something, always found him very helpful
 

aero3113

Jedi Trainee
Offline
I would like to see how some of the half-tonneau's are fastened to the body. I've been thinking of making one also.
 

dougie

Luke Skywalker
Country flag
Offline
This is how one looks at speed. Peter Jackson's awesomely fast Aussie vintage racer looks very sleek with his.

 

CLEAH

Jedi Warrior
Country flag
Offline
That was exciting! Hope the other guy (and car) were OK after that off!
 
Similar threads
Thread starter Title Forum Replies Date
HighAltitudeTR3 T-Series MGTD Sheet Metal Gauge?? MG 0
AUSMHLY BJ8 Transmission just rebuilt now has metal filings Austin Healey 10
D Made a sheet metal break. Restoration & Tools 5
J Door Draught Metal Clips Austin Healey 4
B Bugeye Original Engine Compartment Sheet Metal. Act Fast! Spridgets Classified 0
F Off Topic metal forming for a friend Triumph 25
N Spridget sheet metal Spridgets Classified 0
steveg TR6 Metal Dash - does anyone make one? Triumph 13
J For Sale Triumph TR 2/3MISC sheet metal parts Triumph Classifieds 1
Busted knuckles TR2/3/3A Sheet metal question, Triumph 5
jfarris TR2/3/3A Metal washers for SU H6 float bowls Triumph 1
RAC68 Loose Metal Knocking/Banging Sound during Rough Idle Austin Healey 32
red57 Metal prep of chassis after repairs and shot blasting Austin Healey 5
RAC68 Source - Metal Clips for securing Convertible Top and/or Seat Covers Austin Healey 11
71TR6 TR2/3/3A Moving a radius on sheet metal patch Triumph 12
S TR2/3/3A busted through to bare metal Triumph 18
F Wanted TR6 Shock Turret Sheet Metal Triumph Classifieds 1
SpeedyG TR4/4A TR4 vs. TR4A metal dash panel Triumph 5
S TR2/3/3A were the 2 metal gas lines connect Triumph 18
HighAltitudeTR3 TR2/3/3A What is non magnetic metal and gets stuck in Pressure Relief Valve? Triumph 48
S TR4/4A Metal facia trashed Triumph 3
R metal adhesives Austin Healey 12
Tinkerman TR2/3/3A 1960 tr3a sheet metal fitment Triumph 6
C Recommendations on where to send my 1954 BN1 for metal work? Austin Healey 13
T TR2/3/3A TR3A Sheet Metal Piece Needed Triumph 2
I General TR Pot metal rechroming Triumph 7
T TR2/3/3A Requesting some Pictures for metal work Triumph 9
MTribe TR6 Can you identify these metal shavings in the oil? Triumph 32
T TR2/3/3A Repairing thin aluminum sheet metal like the grill. Triumph 6
Brinkerhoff MGA metal work details MG 18
certifiedcarnut Spridget master cylinder cap, metal Spridgets 8
S TR2/3/3A Odometer gears for the early pot metal speedometer Triumph 27
Scot1966 TR6 TR6 sheet metal Triumph 3
D Another question 1967 BJ8 top installation,metal retaining strip Austin Healey 1
T TR4/4A Fabricating a metal panel in between the fuel tank and cockpit Triumph 6
G Filler metal used for tig welding ah aluminum shrouds Austin Healey 2
JPSmit New fun tool review - metal tumbler Restoration & Tools 6
R Simple question about metal Spridgets 18
Hap Waldrop King Tri metal Bearing MG 10
doc50 Best Method to weld sheet metal repair panels in... Triumph 10
S TR2/3/3A tr3 metal fuel lines Triumph 1
L Bugeye door pocket metal trim Spridgets 0
G TR2/3/3A Tropical metal fan for TR3 Triumph 4
S TR2/3/3A those metal button trim pieces tr3 Triumph 5
J Metal work restoration of a TR3A Restoration & Tools 1
J TR2/3/3A 1959 TR3A metal work restoration. Triumph 9
D austin healey sheet metal Austin Healey 2
M sheet metal thickness Spridgets 3
D Polished Metal Coating to Protect Shine Austin Healey 1
M New sheet metal trades Spridgets 0

Similar threads

Top