• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

MGB Popcorn, Anyone?

Mickey Richaud

Moderator
Staff member
Gold
Country flag
Online
Upon removing the head on the engine that's going to be rebuilt for the Victor TF, this was found in #3 cylinder.

cylinder corn-1.jpg


cylinder corn-2.jpg


Now, how do you suppose whatever critter it was got it in there? Carbs and both manifolds were in place; head was torqued down, plugs also in place.

Good news is the cylinder walls look pretty good. Haven't gotten into the block yet, but think it'll be OK.
 
Offline
That's just residue from too much ethanol in the gas.
 
OP
Mickey Richaud

Mickey Richaud

Moderator
Staff member
Gold
Country flag
Online
Offline
Honestly though, it probably got in there well before the carbs were installed.
 
OP
Mickey Richaud

Mickey Richaud

Moderator
Staff member
Gold
Country flag
Online
When I bought the Victor, the seller told me he got this engine from a running '69 BGT. Pulled it and set it aside; been in storage with everything still attached for several years. Here's a picture when I got it home; I removed the starter, but everything else was still there. No corn around here, so the corn got there before I got it.

TF-garage.jpg
 
Offline
Open exhaust valve. Little mouse using the exhaust port to stock up for winter possibly.
 
OP
Mickey Richaud

Mickey Richaud

Moderator
Staff member
Gold
Country flag
Online
Open exhaust valve. Little mouse using the exhaust port to stock up for winter possibly.

That seems like the most likely, as the downpipe was still connected to the exh. manifold. Clever little critters!
 
Offline
I can't wait to see what's in mine. Lol. Shouldn't be much as the whole exhaust with mufflers has been attached. After I get my B all stripped down, my biggest problem is going to be how to get all the rat poop out of the passenger side trumpet piece under the fender. That's a tiny little opening, and it's 3 inches deep in there.
 
Offline
Oh, and then repairing the chewed up wiring harness. Uggh.
 

AngliaGT

Great Pumpkin
Country flag
Offline
When I bought the Victor, the seller told me he got this engine from a running '69 BGT. Pulled it and set it aside; been in storage with everything still attached for several years. Here's a picture when I got it home; I removed the starter, but everything else was still there. No corn around here, so the corn got there before I got it.

View attachment 46667

Mickey,

That garage looks way too neat/clean!
 
OP
Mickey Richaud

Mickey Richaud

Moderator
Staff member
Gold
Country flag
Online
Mickey,

That garage looks way too neat/clean!

Thanks, Doug; it stays fairly clean, but cluttered. Need to get rid of a bunch of stuff!
 
Similar threads
Thread starter Title Forum Replies Date
AngliaGT 1997 Miata - Anyone Have a Picture on How to Mount the Front License Plate Bracket? Other Cars 12
AngliaGT Anyone Looking for a '28 Buick Drive Train for FREE? Other Cars 0
S TR2/3/3A Anyone cut out the spare tire compartment on a tr3? Triumph 4
AngliaGT Anyone Plan on Attending the SCCA Runoffs at VIR Next Week? Racing 6
R TR2/3/3A Does anyone know the paint Code for british Racing Green for a 1954 TR-2? Triumph 12
Celtic 77 Anyone recall Hobo Hill in New York State? Racing 0
T Rut's 4 speed shifter modification - anyone have knowledge? Spridgets 3
JPSmit Gear reduction starters anyone? Restoration & Tools 5
L Can anyone tell me what car this is from please? Other Cars 0
DrEntropy Show this to anyone under 40... Restoration & Tools 9
K TR2/3/3A Can anyone confirm that if you replace the ammeter with a voltmeter ( generator removed and alternator added) that you...... Triumph 5
D Can anyone identify this vintage car? Other British Cars 17
T Can anyone identify this bumper Spridgets 5
AngliaGT Morgans - Anyone Heard From John Sheally lately? Other British Cars 13
johntennyson Anyone Know These Guys? Or Remember Sprite-Midget Owners' Group? Spridgets 29
K TR2/3/3A Anyone remember the "rattling gear shift" fix? Triumph 8
roscoe Comments, anyone? Austin Healey 3
BillyB62 TR2/3/3A Anyone seen a valve cover like this Triumph 0
T TR2/3/3A Has anyone designed a hand brake warning light for the TR3? Triumph 3
Pythias Sprite Winged Bonnet Badge.... ANYONE? Spridgets 16
B Anyone have a Europa Twin Cam for sale? Lotus 6
B Anyone have spark advance data for Piper camshafts? Spridgets 1
Got_All_4 TR5/TR250 New Hazard Relays Does Anyone know How to Hook Up Triumph 7
steveg TR6 Metal Dash - does anyone make one? Triumph 13
T Powertrain locked up three times whilst driving today - anyone have thoughts? Spridgets 15
S TR2/3/3A Anyone care to share their bondo applying techniques Triumph 26
DrEntropy MGB Clevis pins, anyone? MG 3
69MGC Wanted Anyone know this guy? MG Classifieds 2
B Does anyone still make or sell a quality condenser? Austin Healey 14
W TR6 Anyone add Exhaust tips to standard exhaust Triumph 4
K TR2/3/3A Anyone have a picture of the crankshaft pulley.... Triumph 1
K Anyone racing a TR3? Racing 5
S General TR Can Anyone identify this TR Triumph 3
C Anyone know where to get one of these? Austin Healey 6
Grantura_MKI T-Series MG TD anyone? MG 5
HealeyRick Why Would Anyone Butcher a Healey with a V8? Austin Healey 26
K TR2/3/3A Anyone running NGK spark plugs? Triumph 26
K TR2/3/3A Anyone heard of an oil additive called 'Molyslip E" ? Triumph 5
Basil SS100 anyone? Jaguar 5
Jim_Gruber Recovering Dashboard - Anyone tried this approach? Spridgets 4
T TR2/3/3A Anyone running tubeless radials on TR3 steel radials? Triumph 2
R General TR Anyone going to TRA in North Georgia? Triumph 0
R Wanted Anyone have one of these? Triumph Classifieds 6
mt10flyer TR2/3/3A Anyone race prepped a TR3? Triumph 3
Rut TR4/4A Sorry Top anyone? Triumph 0
Got_All_4 General TR Anyone know where to get one of these? Triumph 5
AngliaGT Anyone in Charlotte,NC That Could Check Out a Truck for Me? Other Cars 0
Gliderman8 TR2/3/3A A nice ORIGINAL TR3A resto project if anyone is looking Triumph 3
Got_All_4 TR2/3/3A Has anyone installed one of these slack limiting plates Triumph 4
T Hurst Line-Lok/Roll Control/Launch Control - anyone use? Spridgets 5

Similar threads

Top