-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Sloppy 100-6, 3000 door hinges
- Thread starter BoyRacer
- Start date
Share this page
D
Duane_Rhynard
Guest
Guest
Offline
Richard,
Two options in the links below, I need to have mine done, but have not done it yet, so I have no experience with either.
Thanks,
Duane
https://www.ebay.com/itm/390937705632?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
https://www.hoodhingerepair.com/
D
Deleted member 19315
Guest
Guest
Offline
Get a decent machine shop to drill and ream the pin oversize. Fit new pins made from a stock silver steel. Simples.
OP
BoyRacer
Jedi Warrior
Offline
Duane, Thanks for the links. The guy on ebay has the right idea. I've got a press and a media blast cabinet, so i'm gonna give it a try myself. It appears that it is only the aluminum half of the hinge that wears. I've got a good machine shop that can drill out the holes for some new bushings. Since I've got 4 hinges that need refurbishing, I know I can do it myself for a lot less than the guy on ebay charges.