• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Free Parts

Share this page

sp53 said:
So the transmission is the full synchro.
Click to expand...
He just means synchro on all forward gears. Still no synchro in reverse.
 
No, Steve, I think I'm keeping the tranny. It's funny that the tunnel was on for the last 2 years, so I never saw the tranny. I pulled the tunnel off last week, but didn't take the time to even glance at the tranny. Even taking the pic, I just framed and snapped without paying attention. All my attention was on the tub. I probably wouldn't have given it the time of day until I pulled it for somebody! But Jerry is much sharper than I am...he noticed about 5 minutes after I posted the pic.

I am running a TR4 tranny in the TR3 right now, but the case in that one had to be welded up for the counter shaft to fit snuggly. It's working great, but I am concerned for it in the long term with the alignment on all those welds. I have been shopping for a replacement case for almost a year. In all this time, I never dreamed a good case was sitting in the back yard! I just assumed it had the TR3 box.
 
John this is like a shark feeding frenzy to me. I am starting to eyeball that lawn furniture you have the parts sitting on.
 
Hi John, did you happen to receive my pm replies? I tried a few but don't see them in the sent folder, kinda strange. When you have a chance let me know... thanks! Tim
 
Funny Steve! It is a better reaction than I was expecting...

I got it Tim. I should have it boxed and gone in a couple days...
 
Hello John

Have just joined this Forum.

Did not see the steering wheel mentioned. I have just purchased a TR3A in pieces and one of the pieces that was missing is the steering wheel.

Best regards
David
 
Welcome David!

No, sorry but I actually had to buy a used wheel from Marvin Gruber. I've got the original, but it doesn't have much plastic grip on it. Just a steering wire.
 
I'm starting to get many questions about other parts. If you can't see what you are looking for in the pics, then I don't currently have any extras.
 
Ooooo hand crank brace I need one of those as well! I should fly down to TX, and see all that there and do a carry on package. If you've not shipped mine stuff can you throw in the brace?
thanks
 
Packed, but not shipped yet, Eddy...I'll throw in the crank brace.

JP, I do have the upper column...Geo got the lower with the gear.
 
Hello John

Thank you.

I think I can get a reproduction one from TRF.

One of your photos identified a mystery part for me. I have boxes of parts of a TR3A taken apart in 1998 approximately.

Best regards
David
 
OK...I sent 7 packages out today, so most of the parts are on their way.

I did not send the brake handle to Tim or the steering gear to Geo yet, as those two are odd sizes and I need to find something to put them in. Also, Paul has asked for a couple parts that I did not get until tonight.

They all went out USPS, by the cheapest shipping they had, so look for them in 3-10 days. I've PM'd the shipping costs individually...
 
Dollar stores have a great selection of padded envelopes. I am not concerned with the USPS damaging the the lever, you could just fold a piece of cardboard over it and tape the edges. Thanks!
 
Finally got the last of the parts out on Friday, 4 Mar. Whew...I had no idea the response would be so big, but very glad the parts are going to good use.

I sent PM's with shipping to Tim, Geo, and Paul.

At the end of the summer I will likely revive this thread one last time to clean out my 3 years of restoration accumulation. After that I'll have no need for extra parts...will just have to maintain the 2 cars I have!
 
Back
Top