I disconnected the clutch housing from the center-gearbox and found that there was no spring washer and washer between the input shaft bearing and the housing as described in the service manual (position 3 and 4 in the Moss diagram).
Now I have seen that these two parts are not available at AH Spares and Moss. Instead, AH Spares offers shims of varying thickness. But how do you determine which shims you need to fix the ball bearing between the two housing parts?
Now I have seen that these two parts are not available at AH Spares and Moss. Instead, AH Spares offers shims of varying thickness. But how do you determine which shims you need to fix the ball bearing between the two housing parts?