Offline
I just replaced the seal on my BN2 steering box. Have read about the problems getting the pitman arm off.
With the proper tool, I was able to get the arm off without moving or loosening the steering box at all. It just slipped into the joint from the wheel side & popped the arm right off.
The puller is Stahlwille #12616, code 71050000. See attached pic.
Nice to not have any leaks now.
D
With the proper tool, I was able to get the arm off without moving or loosening the steering box at all. It just slipped into the joint from the wheel side & popped the arm right off.
The puller is Stahlwille #12616, code 71050000. See attached pic.
Nice to not have any leaks now.
D