• Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Installing Radio Today - Any advice?

BrandonBJ8

Jedi Trainee
Offline
I'm going to be installing the a radio/cd player behind the radio blanking plate today. (already converted to negative ground) I just wanted to see if anyone that has installed a radio in the car has any advice or suggestions on what wires to tap into or any other installation tips? I figured I could maybe learn from previous mistakes if someone had already tried something that didn't work too well.

Thanks!
 

Keoke

Great Pumpkin
Country flag
Offline
Hi Brandon, should be straight forward. Up under the dash should be an empty connector with a brown wire attached that can be used for the primary power source for the radio. Both radio power and Memory if there is one can be common at this point.--Fwiw-Keoke
 

SHG

Jedi Warrior
Country flag
Offline
Make yourself happy and ignore everyone here. If we were all such geniuses, we'd all be Keoke.
 

Dave Richards

Jedi Knight
Country flag
Offline
SHG said:
Make yourself happy and ignore everyone here. If we were all such geniuses, we'd all be Keoke.

Ouch! either really funny /bcforum/images/%%GRAEMLIN_URL%%/jester.gif or you're having a bad day...? /bcforum/images/%%GRAEMLIN_URL%%/cryin.gif But shouldn't he follow the speaker types and placement discussions we've had?
 
OP
B

BrandonBJ8

Jedi Trainee
Offline
It's all finished. Everything is working well. I'll provide a more detailed post and pictures later. Thanks!
 

Keoke

Great Pumpkin
Country flag
Offline
SHG said:
Make yourself happy and ignore everyone here. If we were all such geniuses, we'd all be Keoke.



/bcforum/images/%%GRAEMLIN_URL%%/savewave.gif

Naw SHG, I was just passin by and I knew you were busy so I thought I would just help him out a bit.---Keoke-AZ /bcforum/images/%%GRAEMLIN_URL%%/cowboy.gif--- /bcforum/images/%%GRAEMLIN_URL%%/grin.gif
 

SHG

Jedi Warrior
Country flag
Offline
dar100 said:
SHG said:
Make yourself happy and ignore everyone here. If we were all such geniuses, we'd all be Keoke.

Ouch! either really funny /bcforum/images/%%GRAEMLIN_URL%%/jester.gif or you're having a bad day...? /bcforum/images/%%GRAEMLIN_URL%%/cryin.gif But shouldn't he follow the speaker types and placement discussions we've had?

I'm just having a little funny at Keoke's expense, because I know he can take it and (more importantly) he's helped me more than he will ever know. Not that I haven't received a ton of help from lots of guys, but I send Keoke emails offline when I'm stuck doing something stoopid and he's always there.

As for Brandon, he's asked and heard. Now it's time for him to make himself happy. After all the agony of trying to decide what the right thing to do is, you gotta make your call and hope that it turns out the way you want. I'm betting his will turn out great.

Tell you the truth, I'm having a pretty good day. Lot's of problems, but a good day. Can't ask for more. Hope the rest of youse guys have a good one too.
 
Similar threads
Thread starter Title Forum Replies Date
saabmp3 Installing Radio Spridgets 0
J Installing Adapter Hubs for Wire Wheels on a Bugeye Austin Healey 5
S Installing a Radiator Fan Austin Healey 9
G Installing New Rocker Shaft Assembly Austin Healey 3
W Need advice on installing new side curtain glass Spridgets 1
Bayless Help please installing bonnet release cable Spridgets 8
M TR6 Installing Retrosound? Triumph 4
S TR2/3/3A Installing the distributor pedestal. Triumph 3
K TR2/3/3A Question about installing the steering wheel control head? Triumph 1
A TR6 Installing differential and transmission Triumph 10
Z Installing Toe Board Panels Austin Healey 1
K TR2/3/3A Installing Brake Caliper pistons into the bore? Triumph 21
CJ Burton MGB-GT Installing Seat Covers for 1962 - 1967 MGB GT MG 0
A Early 1967 AH Sprite - installing steering column and new directional switch? Spridgets 0
B Installing cam bearings 1275, can I do it? Spridgets 1
bighealeysource Installing stainless steel brake hose on BN2 Austin Healey 5
steveg TR6 Installing stock trailing arm bushings on the car - is it possible? Triumph 2
steveg TR6 Installing adjustable trailing arm brackets Triumph 7
T Installing Garmin GPS in a BJ7 Austin Healey 19
F Installing AC in my 1960 Healey Austin Healey 14
S TR2/3/3A technique for installing a door Triumph 5
R TR2/3/3A Installing wiring harness in steering column Triumph 59
R TR2/3/3A Installing gas tank Triumph 6
C Installing rubber grommets in firewall? Austin Healey 6
S TR2/3/3A installing a fuse in the red tail lights Triumph 4
S TR2/3/3A installing the wiring harness Triumph 8
R Installing Sprite Luggage Rack Spridgets 9
Lukens TR2/3/3A Installing a throttle. Triumph 2
J Powertune booster for a bj8 , trouble installing Austin Healey 2
B TR2/3/3A Installing dzus fastners in bonnet Triumph 8
D Prepping Floors Before Installing Interior Restoration & Tools 6
drooartz Installing front hubs, tips? Spridgets 15
E TR4/4A Wiring the horn when installing a Moto -Lita steering wheel Triumph 4
K TR2/3/3A Installing Moss wheel spacers? Triumph 5
D BT7 tri-carb installing my crank Austin Healey 4
aero3113 Installing Front rotors to hubs Austin Healey 2
C Advice for installing a 3000 Grille??? Austin Healey 7
B MGB Installing new upper fulcrum bushings MG 5
B MGB Installing upper fulcrum bushings MG 0
S TR4/4A procedure for installing gauges etc Triumph 0
I Tips for installing intake manifold plugs in a stock Bugeye? Spridgets 6
55modified Help installing toggle dip switch on dash for lights. Austin Healey 23
TRMark TR4/4A Installing a new windscreen Triumph 9
55modified Rear anti-roll bar. Is it worth installing on a BN1? Austin Healey 22
T Installing a Lucas 16 ACR alternator on Bugeye Spridgets 10
KVH General Tech Installing the Pistons and Rings Triumph 7
T Need advice for installing a Winner's Circle Panhard rod on a BE Spridgets 4
6 General Tech Installing New Oil Pressure Gauge MG 5
6 Installing Oil Pressure Gauge Spridgets 2
T TR4/4A Installing wheel arch covers in a Tr4a Triumph 0

Similar threads

Top