AH Muffler used on other cars

[twas_brillig]

Has anyone mounted an Austin-Healey six cylinder muffler on another car? I just measured ours (about 3" deep; 6.25" wide; 26.5" long) with the intention of checking to see if we could install one under a 1973 BMW 2002 that we own - but I'd like to 'hear' impressions of the sound when you put the Healey silencer behind a different engine. (I would intend to cut the ends off and replace them with single inlet/outlets to match the 02).
Doug

 

[Keoke]

I think in this case I would recommend:
Render unto Caesar that which belongs to Caesar---Keoke-

 

[HealeyRick]

+1 with Keoke. If you're looking for that Big Healey sound by grafting a Healey muffler on an '02, don't think you're going to get it. Upgrade the Two with a period Bimmer muffler and leave the Healey out of it.

 

[BoyRacer]

I put a 1978 Datsun 280Z motor (Nissan) in an Austin-Healey 3000 back in "97. That's why I am also one of the Nasty Boys. I used a stock Healey (Walker) muffler. It sounds just like a Healey. If you put that muffler on a car with an inline 6 cylinder motor, IT WILL sound just like a 6 cylinder Austin Healey engine.

 

[HealeyRick]

I don't think there's much chance of the two-litre four cylinder motor in the 2002 sounding like a three-litre Healey. Another issue I see is I guess that the dual inlets and outlets on the Healey muffler are connected by dual perforated pipes that bleed the sound into fiberglass packing material so it wouldn't be as simple as changing the end caps. I've never dissected a Healey muffler though, so can't say for sure.