David_Doan
Jedi Warrior
Offline
I put together the flywheel, clutch, trans today. It seems that the slave push-rod is about 0.7" too short. I verified that the push-rod is the correct length for a 948 with smoothcase (2.75"), also the same as previous. The release bearing is new and the same dimensions as the old one. The clutch and pressure plate are the same parts I took off. The slave cylinder is the 7/8" bore. The clutch did not work well before the tear-down, I guess this is why. It would catch as soon as the petal came off the floor.
So which part is wrong? or should I just procure or fabricate a longer pushrod?
Some pics to help:
So which part is wrong? or should I just procure or fabricate a longer pushrod?
Some pics to help: