Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have a 175CD carb on my 1980 mgb. I calibrated the thermo element and I need a new gasket that bolts the housing to the heating element. Does anyone know the PN for this gasket or where I can get one? Now I am waiting for this before getting it back on the road again. Thank you
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
MGB Zenith water choke gasket needed
- Thread starter prc
- Start date
Share this page
Offline
Unless the car is to be judged for originality, consider a manual choke conversion. The hot water and electric versions are a "compromise to convenience" in my opinion. And just one more gizmo bound to cause grief at some point. Having worked on these things since the early eighties in our shop, replacing the "automatic" unit eliminated a future failure. The manual version just WORKS.