• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Zenith Carburetor

Share this page

P

pisser

Freshman Member
Country flag
Offline
Can someone help I have two Zenith Stromberg's and they have adjusters on the bottom float bowls Do I adjust the mixture there or go through the dash pot Thank you
 
Hi All I have the two Zenith Stromberg I am trying to get them the same When i use the tester for the Idle on the front carb it kills the engine with the ball at the top No mater what I do The rear is fine It seems the slide does not come down as fast as the rear, I did loosen the linkage from each carb Even if I have the idle all the way down it will kill The lower jet I play with its so so Any ideas
 
Back
Top