• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Yoke flange question

Share this page

jerrybny

jerrybny

Jedi Knight
Offline
I think this question has been asked once before but I couldn't find it so here goes. My son and I were removing the outer shaft assembly from both sides of my 73 TR6. The problem is he forgot to scatch both sides of the flanges so that we would know how to put it back together. The question is is there anyway to tell when you have the yoke flange and the driving flange properly orientated? Thanks
 
Hi,

I don't know if it's the same on the TR6 axle shafts, but TR drive shafts usually have a couple small arrows engraved on the yoke and shaft that need to be aligned. Might help.

/ubbthreads/images/graemlins/cheers.gif
 
Back
Top