• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Won't start

  • Thread starter Thread starter 2Triumphs
  • Start date Start date

Share this page

2

2Triumphs

Guest
Guest
Offline
I have all electrics except wipers, turn signals, heater. Is the problem the ignition?
 
No. Everything works but the wipers, turn signals, heater motor. I was thinking that it might be the ignitions switch. All fuses are good. What all is connected to the ignition switch? Do you know. Help.
 
I just pulled out a wiring diagram. Looks like the switch connects directly to the starter and ammeter and dash lights, and the brakes lights are fused. There is other stuff too btw. If you have brake lights and dash lights then it's less likely to be the switch. If you have a voltmeter, check there is current to the starter. If so then it's either bad or jammed (which used to happen to me on my Herald all the time - a tap with a hammer often helps).
 
my pleasure - hope you find the problem. i found this in a different thread. it may help you out. the link seems to work still.

"I got my wiring diagram from www.advanceautowire.com. Go there and click on "Stock Schematics" Very helpful, since the diagram I had previously was riddled with errors. "
 
[ QUOTE ]
No. Everything works but the wipers, turn signals, heater motor. I was thinking that it might be the ignitions switch. All fuses are good. What all is connected to the ignition switch? Do you know. Help.

[/ QUOTE ] Even if the fuses look good, they might not be "clean" where they contact the fuse box. Try just moving them back and forth a bit, as the outages you describe sound to be directly related to that fused circuit. Could also be the fuse box itself and/or the wiring connected to it. But roll those fuses around first; that seems to cure such problems a majority of the time!
 
Back
Top