Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Whitephrog
Luke Skywalker
Offline
I've been pondering how to install my Crane Cams electronic ignition without it being overly apparent and without having to drill additional holes in my engine compartment. I came up with the idea of attaching the box inside the cockpit mounted with heavy duty velcro then running the four wires through the firewall through a spare hole.
That idea worked fine but I didn't like the look of four colored wired running around the engine compartment. I tried without success to find something to hide the wires yet look like it "belonged".
Comes Doug Lawson to the rescue!! He suggested that skate boot laces might work. After a bit of searching I found a near perfect pair of laces that complement the black with blue tracer BE wiring harness. The following is a link to the results. https://www.spritespot.com/gallery/view_p...amp;id=DSC03527
That idea worked fine but I didn't like the look of four colored wired running around the engine compartment. I tried without success to find something to hide the wires yet look like it "belonged".
Comes Doug Lawson to the rescue!! He suggested that skate boot laces might work. After a bit of searching I found a near perfect pair of laces that complement the black with blue tracer BE wiring harness. The following is a link to the results. https://www.spritespot.com/gallery/view_p...amp;id=DSC03527
