• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

MGB Wise tool investment - if you can find one

Share this page

Boggsy64

Boggsy64

Jedi Hopeful
Offline
I inherited a bunch of tools from my dad. One that has REALLY come in hand when working on my B is his old "rigid" universal joint 3/8" ratchet adapter. This adapter allows access, and work, on many fasteners I would have killed myself to get at. One prime example was the nuts holding the dash on. Using several extensions and the universal adapter I could reach the nuts easily, even around the wiring harness. Also used this jointed adapter to get at the front cross member bolts. If you can find one I would strongly recommend adding this to your tool box!
 
Show us a picture of it if you can...
 
I looked on Ebay and found a picture and lots of these for sale. universal joint .jpg
 
Snap-On now gets $40 for a ÂĽ" one. :crazyeyes:

They used to give them away as promo trinkets!!

For the stuff in places like the crash-pad bolts I have both SAE and metric swivel socket sets in 1/4" and 3/8" drive.
 
Yes my dad used to own a service station in the early 60's and I think he received these then (maybe as freebies?). There is also a small set of universal jointed sockets in various socket sizes. I have carried them for years in my toolbox and just never found a use for them, until the MGB! (now they have become "goto" attachments).
 
Snap-On passed out their small U-joints as key-rings, the pivot pin was removed and rings put thru the resulting two holes in each piece. Convenient way to detach the car key from a set of others to reduce the stress on the iggy switch.

I consider those quarter-drive socket sets invaluable. I work (and worked) primarily on Euro-trash cars, so a lot of the fasteners were in hard-to-access places... Porsche, Alfa and Rolls come to mind as the prime suspects.
 
I need to add in a few of these little helpers -- though with the Bugeye there are fewer hard-to-reach bits. Just fewer bits in general, really. Still, every time I've added a new specialty tool and then done the job it was meant for, I'm always reminded of how nice the right tool for the job is.
 
Something else that I just found is "wobble" extensions at Harbor Freight. They let the socket or another extension angle a little, so they don't flop over completely, but still "swivel". And they aren't too pricey.
FWIW
 
Back
Top