Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
budk1953
Jedi Warrior
Offline
I'm getting ready to install a larger fuse panel. Think I've got it all sorted out except for the following;
Lighting circuit brings red/green from the switch to feed reds to various lights. If I were to use a double pole panel (one side constant hot, other side ignition hot)how would I wire this circuit? Or should I use a in-line fuse?
Also I found a brown/purple wire that had been cut off in the harness that feeds the fuse panel and can't find anything on my wiring diagram to tell me what this is for.
Thanks,
Bud
Lighting circuit brings red/green from the switch to feed reds to various lights. If I were to use a double pole panel (one side constant hot, other side ignition hot)how would I wire this circuit? Or should I use a in-line fuse?
Also I found a brown/purple wire that had been cut off in the harness that feeds the fuse panel and can't find anything on my wiring diagram to tell me what this is for.
Thanks,
Bud