• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Wiring question TR3A

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
Afternoon, I have four wires coming out of the stering stator tube. I know where they go, but how do I route them to their new home? Pictures would be great.
Any thoughts would be very helpful.
Thanks, Tinkerman
 
Hey Dick...pics will be very difficult, as they are tucked behind the apron, under the grill, and behind the horn. That said, they come out of the tube and head upward to one of those cute little "T" shaped bendable wire holders on the inside/inner wing. There is a second T farther up the wing, and then they come out from under the horn on that side, to terminate at the ground point and multiple wire connectors right behind the horn.

I'll look for pics, but it's one of those routings you have to feel blindly once the apron is on.



John
 
Found one...


_DSC4302.jpg



And the topside connectors....

_DSC4314.jpg
 
Thanks! Just what I needed. When I bought this car it was a basket case, and the last bit of disasenbly was done by my step son. Good guy, but one of those types that could screw up an anvil with a rubber hammer.

Appreciate the pics and the info, Dick
 
Back
Top