Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
bob hughes
Luke Skywalker
Offline
Hi guys
I have come to the collective ensemble with a small electrical problem and I am sure some one can point me in the right direction.
I have a BJ7 with a Positive earth ( ground ) and it does not have a cut out switch in the boot ( trunk). ( Note to self - must buy one. ) On the wiring diagram there is a white with black wire linked from the switch to the CB terminal of the coil. I am rewiring the car and the existing white with black wire was lurking loose in the trunk and was chopped off in the engine bay just short of the coil. The CB terminal was connected to the dizzy as per the diagram. What is the purpose of this wire, does it act as an electrical short when the cut out switch is activated?, that is the only solution that I can come up with as the car was fine as it was.
Bob
I have come to the collective ensemble with a small electrical problem and I am sure some one can point me in the right direction.
I have a BJ7 with a Positive earth ( ground ) and it does not have a cut out switch in the boot ( trunk). ( Note to self - must buy one. ) On the wiring diagram there is a white with black wire linked from the switch to the CB terminal of the coil. I am rewiring the car and the existing white with black wire was lurking loose in the trunk and was chopped off in the engine bay just short of the coil. The CB terminal was connected to the dizzy as per the diagram. What is the purpose of this wire, does it act as an electrical short when the cut out switch is activated?, that is the only solution that I can come up with as the car was fine as it was.
Bob
