-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Stag Wiring plugs for gear lever knob overdrive switch.
- Thread starter malbaby
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
I believe in the US, they are called simply "female quick connects" or sometimes "female disconnect". Sorry I don't recall the correct size offhand, but here's an example
https://www.digikey.com/product-detail/en/63391-1/63391-1-ND/294492
The wire has to be extra small too, to fit through the lever; and I think is supposed to be extra-flexible since it flexes every time you change gears. The room inside the knob is very limited as well. After trying to do my own, I found it easier to just buy that section already made up. Some Spitfires use the same piece.
https://www.digikey.com/product-detail/en/63391-1/63391-1-ND/294492
The wire has to be extra small too, to fit through the lever; and I think is supposed to be extra-flexible since it flexes every time you change gears. The room inside the knob is very limited as well. After trying to do my own, I found it easier to just buy that section already made up. Some Spitfires use the same piece.