• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

WIRING HARNESS CONNECTOR PLACEMENT

Share this page

N

neils

Freshman Member
Offline
I have a new jules frame and am about to install a new wiring harness As the new frame does not have the holes drilled for the harness clips does anyone have photos showing the harness routing and clip location I have a BJ8 with over crive Thanks /ubbthreads/images/graemlins/nopity.gif
 
HI Neils, I don't know why others with this same problem have not responded to your query. However, it came up just recently on this forum and some information may be in the archives. Fwiw ---Keoke
 
I have some photos of the main harness before I striped it from my BT7. In retrospect, I should have used better lighting and I am assuming that the BJ8 is simular. Considering the beating these things get, I wonder if anyone hase considered a more protected location
 
Rear section
 

Attachments

  • 258870-HEALEY014.jpg
    258870-HEALEY014.jpg
    169.6 KB · Views: 160
Hi Neils, If you need a more permanent data file Norman Knock of British Car Specialties sells a complete set of photos showing the location of the Harness and it's clips.--Fwiw---Keoke
 
Thanks for your responses. I am in the same position as Richard, having not taken enough detailed photos with good enough lighting as I stripped the car down - I thought I had enough with over 100, but when you get to the fine details there is always something not properly visible or in enough detail.
 
Back
Top