Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Well I found out why my Ignition warning light wasn't working. Last time I was back behind the gauge cluster I had run a white wire from the ignition switch to the voltmeter but forgot to run a white wire to the warning light. Doh! Can I now just run an additional white wire from the IGN switch to the warning light and leave the voltmeter hooked up the way it is? The other terminal on the voltmeter gauge is attached to ground?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR2/3/3A Wiring a voltmeter gauge to replace the ammeter.
- Thread starter karls59tr
- Start date