• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Wire Wheel Conversion

Share this page

vping

vping

Yoda
Offline
If you had all the parts for this, how diffficult is a Wire Wheel conversion from one 74 B to another?
 
Not that difficult, but it will take a weekend if you've never done it before. Replace the bushings while you're in there.
 
Rear seems simple like maybe just swapping the whole diff? From I am not 100% sure. Is it just switching hubs?
 
Sounds like a plan. Pull the axle replace any rubber that does not look so hot and swap it out with the Rostyle Rear. Hubs a couple a bolts. I like it.
 
replace all three seals, and make sure the thrust washers feel ok. It's a lot easier to replace them when the axle is on the ground.

Last time my rear axle was off I took it a step farther. I have it blasted clean and painted everything with POR15. It was well worth the effort and I'm much happier every time I go under the car.
 
Back
Top