• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Wiper Motor Problem Not Working

Share this page

M

mxp01

Jedi Warrior
Country flag
Offline
All:

I’ve had an ongoing problem with getting the wiper motor on my 59 BE. I’ve had issues where the motor ran briefly, smoked, and stood working. I replaced the motor (same issue). We bench tested the motor (it worked). I replaced the wiper motor switch. Today we hooked up everything and the fuse fuse immediately blew.

Thoughts?

MXP
 
I would look for a bind or friction in the cable, tube and wheel boxes. Maybe just dried grease.
 
Mike
I will bet that the wire connections are incorrect. Verify them
Billm
 
Bill wins the prize: We re-tested the motor (working) and the tension on the cable moving the wipers (free movement). There were two loose black wires under the dash. I swapped one of those into wiper switch (removing the other) and everything turned on and operated fine. Everything.

I can't explain those other two black wire (to where they should go). I taped them up and secured away. There is also a white wire (with a bullet connector at its end) that I can't account for either.

Otherwise, it's working as designed.

MXP
 
black should <should> be ground
 
If you don't have taped-off wires hanging under the dash leading who-knows-where, you don't have a real LBC.
 
Back
Top