• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Wiper Motor (Adjustment?) Screw

Share this page

D

Deamaker 5

Senior Member
Country flag
Offline
Hello what is the small adjustment screw for in this picture of the wiper motor? Thanks
 

Attachments

  • IMG_8402.jpeg
    IMG_8402.jpeg
    2.2 MB · Views: 25
That is the motor armature thrust adjusting screw, normally not touched. AFAIK the armature should have very little free play end movement but no binding.

Scroll down to the bottom of page 25 "test procedure and fault finding" in the attached Lucas technical bulletin. I think all Healey's have DR2 wipers. You may not be able to set while in car, probably requires removal of the drive cables to be able to assess clearance.

Lucas wiper technical paper
 
Back
Top