• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Wiper blades

Share this page

vping

vping

Yoda
Offline
Another question.
Wiper blades in Moss - WAAAAAAY too much $$ even with a discount. I need three for the 74 Roadster and it'd run mbe close to $60. Is there an autopart store that carries something I can use? Daily driver - so nothing fancy needed.
 
If all you need is the rubber part, get em from wherever and cut em down. Works fine.
 
I used to snipe ONE from me Ol' Fella's spares. He had Lincolns and kept a set in stock... One of his made two of the MGB blades. /bcforum/images/%%GRAEMLIN_URL%%/wink.gif Anco or Trico, can't recall.
 
The rubber is shot vut so are the plastic frames for them. They are not original. If the were original, I would get a single for like a minivan. Shoot, you can get three rubbers outt this easy. I just need 3 small complete blades.
 
i was able to buy complete blades for my '76. i believe i just used any old 11" and they had the necessary bits to hook up to the arm.
 
I have not measured but is that the size needed, 11"?
 
11 or 10... I have to get a new set for my B. It's been a while since I replaced mine, but I do know that I got my last set off the shelf at PepBoys.
 
Trico 11" is what i put on mine. They seem to fit nicely, but the car has yet to see rain. (or much of anything with the interior still out!)
 
Back
Top