• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Wiper blades

Share this page

vping

vping

Yoda
Silver
Country flag
Offline
Another question.
Wiper blades in Moss - WAAAAAAY too much $$ even with a discount. I need three for the 74 Roadster and it'd run mbe close to $60. Is there an autopart store that carries something I can use? Daily driver - so nothing fancy needed.
 
If all you need is the rubber part, get em from wherever and cut em down. Works fine.
 
I used to snipe ONE from me Ol' Fella's spares. He had Lincolns and kept a set in stock... One of his made two of the MGB blades. /bcforum/images/%%GRAEMLIN_URL%%/wink.gif Anco or Trico, can't recall.
 
The rubber is shot vut so are the plastic frames for them. They are not original. If the were original, I would get a single for like a minivan. Shoot, you can get three rubbers outt this easy. I just need 3 small complete blades.
 
i was able to buy complete blades for my '76. i believe i just used any old 11" and they had the necessary bits to hook up to the arm.
 
I have not measured but is that the size needed, 11"?
 
11 or 10... I have to get a new set for my B. It's been a while since I replaced mine, but I do know that I got my last set off the shelf at PepBoys.
 
Trico 11" is what i put on mine. They seem to fit nicely, but the car has yet to see rain. (or much of anything with the interior still out!)
 
Back
Top