• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Wiper arms

Share this page

Bob Claffie

Bob Claffie

Jedi Knight
Country flag
Offline
I'm building a cobra replica and am using a Mini wiper motor and wheel boxes. I need to get some wiper arms that measure about 8 1/2 to 9 inches from the center of the wheel box knurled driver to the mid-point of the blade mounting. Would Standard Mini arms work for me? Thanks, Bob
 
I measured the wiper arms on my Mk. III Cooper "S" and they're 11 inches long (from the center of the wheel box knurled driver to the mid-point of the blade mounting).

Best bet is to go to an auto parts shop and see if they know of any that are the length you need.

[ 11-26-2003: Message edited by: Xracer ]</p>
 
Bob

The Lucas numbers for the Cobra arms are: 745071. That number is not listed for any other automobile in my 1966 Lucas catalog. The shortest arm listed in the 1969 Lucas catalog is 745080 (R.H.) and 745081 (L.H). They are 10".

Good luck in your search
 
Back
Top