-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR4/4A wing patch panels
- Thread starter Rut
- Start date
Share this page
Hello Rut
The PO of my car used a TRF patch panel. It was from around 1999 to 2000 so they may be better now. I notice that the rounded portion between the bottom edge and the vertical section is not an exact match to the original part. Also the rear edge is not folded over. There is a flanged edge to join the panel to the wing.
Apart from that it looks Ok The photos are ones that Albert of TRF sent to me.
I made my own repair part following John's instructions/directions.
David
The PO of my car used a TRF patch panel. It was from around 1999 to 2000 so they may be better now. I notice that the rounded portion between the bottom edge and the vertical section is not an exact match to the original part. Also the rear edge is not folded over. There is a flanged edge to join the panel to the wing.
Apart from that it looks Ok The photos are ones that Albert of TRF sent to me.
I made my own repair part following John's instructions/directions.
David
pa297pass
Jedi Trainee
Offline
Those look like TR3 panels David ... I believe Rut is asking about repair panels for a TR4.
Rut: I do have a set of repair panels from Moss for the front wings of a TR4. I can't speak to the accuracy of them as I haven't installed them, but they are well made and "look" correct.
Matt
Rut: I do have a set of repair panels from Moss for the front wings of a TR4. I can't speak to the accuracy of them as I haven't installed them, but they are well made and "look" correct.
Matt
TR4nut
Yoda
Offline
These are good:
https://niehausrestorationproducts.com/.
The developer Keith is a good guy and very accessible if you need advice. Not positive but I think he supplies Moss and others.
https://niehausrestorationproducts.com/.
The developer Keith is a good guy and very accessible if you need advice. Not positive but I think he supplies Moss and others.