Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
My windshield wiper motor doesn't work. sometimes it will work when i turn it on high but the wipers will just move about an inch then stop. I can wait about 5 mins then do it again and it will move about another inch untill the wipers start on their way down then they go almost normal speed. I checked all the conections and they are fine. I have the motor diasaembled right now the brushes are just fine i think there is something wrong with er motor. what should i do/look for?
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
windshield wiper motor
- Thread starter adam90009
- Start date
Share this page
G
Guest
Guest
Guest
Offline
Was the fitting on the rod that moves the wipers screwed all the way on to the motor housing?
I had the same problem! but my wipers were vertical and moving an inch back and forth.
I had the same problem! but my wipers were vertical and moving an inch back and forth.
Gary Lloyd
Jedi Knight
Offline
If it was me, I would unhook the wiper cable and try again. If it works, then you know where the problem is, if it didn't work, I would bypass the switch and see what happened. At least that way you have all of the possibilities separated. GOOD LUCK!!!!!
Gary Lloyd
Jedi Knight
Offline
Good for you Adam!!!
