• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Windshield Seal on a 65

Share this page

HAN8L1965

HAN8L1965

Jedi Warrior
Offline
Someone please tell me that the seal between the windshield and the body is easily removed by prying the old 40 year old seal out and pressing a new one into place. Or do you have to take the windshield apart?

Mark
 
No need to take the windshield apart. Do you have one of those plastic orange peelers?
 
Thanks for the reply, didn't want to start yanking on it to find out later that I really created a mess.

mark
 
What is the trick with the orange peeler. This is a job coming up for me in the next month or so. I've got a spare windshield with better glass in it than the one currently on Bugsy. Windshield seal was ordered years ago and has been sitting on the shelf. Maybe need to get out and unfold it to let it take on the correct shape / flat well in advance of the time I need it. Cold. cold garage won't let it lay flat. Need to bring inside for a while.
 
The peeler makes it easier to press the other lip into place without damaging it. It'll be obvious when you start. Any dull tool should work, but when digging through the kitchen drawer (the first time I replaced the seal) I discovered the peeler. The second time I couldn't find it and tried various other things, but ended up going to the grocery and getting another peeler (and an orange while I was there).
 
Thanks Trevor, Since I don't own one of those another tool for the kitchen drawer after I'm through with it.
 
Back
Top