• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Windshield Replacement

Share this page

J

jhorutz

Member
Offline
I'm getting ready to do my first windshield replacement on my 74 midget. The glass on the old one is just too fogged. Are there any tricks to replacing the glass and seals? Any help is much appreciated.
 
Get help from someone who has done it before. A real pain.
 
Seemed easy to me, after I got it disassembled and cleaned. I think the mkI/II screens might be harder.
 
use dish washing soap on the seal
to get it to settle in the frame,
and a rubber hammer could come in handy
for tapping things together......
start on the top edge.

my WS is from MOSS, and it installed
nicely....although its together, its
not on the car yet.
also a plastic WS tool will be very
handy, or just use a bondo spreader
like i did :wink: .......zimmmy
 
Back
Top