• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Windshield Motor Maintenance

Share this page

Bruce_B

Bruce_B

Jedi Warrior
Offline
Should I be doing some maintenance on the wiper motor in my car ('59 BE)? It's works OK now, but wondered if there are parts that need to be lubricated, greased?
 
If it ain't broke it prob does not need fixed, hehe.

Open the top, dig out the old greese and clean up a bit and relube. Thats about it.
 
Relube the drive cables as well. Unbolt from motor and give a tug, cable will slide out. Clean and regrease.Slide back in.
 
You had better use a lightweight grease on the wheel, like a white lithium grease, do not use heavy axle grease as this will gum it all up and make it work harder!
 
Thanks for the tips. Something to work on in the garage.
 
Of course you do need to remove the wiper blades and arms before you pull the drive cable out!!!
Bill
 
Billm said:
Of course you do need to remove the wiper blades and arms before you pull the drive cable out!!!
Bill
Click to expand...

That was also something I wanted to point out as well!! /bcforum/images/%%GRAEMLIN_URL%%/grin.gif
 
Naw just lift off the windshield and move to the upward position and watch those babies fly when you remove the cable.
 
Back
Top