• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Windshield bead

Share this page

Morris

Morris

Yoda
Offline
Is it possible to replace the windshield rubber without removing the windshield from the car and disassembling the whole frame?
 
no
 
Morris - There's only 4 screws to take out in order to remove the windscreen. It then lifts right off. Removing the 3 pillar screws on each side, now that can be another story.
 
True- but on a later model (after '64) getting those 4 bolts back in is NOT fun!
BillM
 
Yeah, I've no experience with later models. Thought he was talking about a B/E. Those are a snap.
 
Not hard on the later windshield as long as you use a Posidrive Bit.
 
I think he is referring to how hard it is to get to the mounting bolts while compressing the "body to windscreen" seal. (Esp with the padded dash cars).
 
Back
Top