Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
The centre support for the windscreen has a large gap between the bracket and the body mounting hole there seems too much load on this bracket and distorts the windscreen frame, what would be the suggested or recommended gap between body and bracket for slight preload? at the moment I have a 1/4 inch gap, my own judgment would be to re set the bracket to give a maximum gap of say 1/16 inch, everything else lines up and fits as original . Thanks Saltiga
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
window centre support
- Thread starter saltiga
- Start date
Share this page
AUSMHLY
Yoda
Offline
There should be a rubber well nut between that gap. It's an expansion well nut that holds the center of the windscreen to the shroud.
British Car Specialist sells it. Part number AHB9794 Sells for about $4.00 Telephone 209.948.8767
Or check your local hardware store for something similar in size.
British Car Specialist sells it. Part number AHB9794 Sells for about $4.00 Telephone 209.948.8767
Or check your local hardware store for something similar in size.