• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Whitworth fill plug for lever shocks

Share this page

jfarris

jfarris

Jedi Trainee
Offline
Greetings,
What is the best solution for removing and replacing the filler plug on the lever shocks on a TR3?
Maybe 6-sided 9/16 socket or has someone found a closer fit that won't eventually destroy the plug.
Thanks,
 
I'll confess... I never realized it was Whitworth. I suppose I used whatever looked right & fit, anyway never had a problem. I don't wail on it to tighten, just snug it up.
 
What you need is a 1/4" BSW (Whitworth) socket. Your corner hardware store won't have it, but they can be found.

Here's a modest set on Amazon for under $30:
https://www.amazon.com/8pc-Drive-Whitworth-Socket-Rail/dp/B00GYH1HM8


PS, if that size seems silly, it's because Whitworth sockets are sized by the diameter of the bolt, rather than the head. 1/4 BSW is also 5/16 BSF because BSF bolts have a smaller head (relative to thread size) than BSW.
 
Back
Top