Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hey Guest! British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
**Upgrade Now** (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
MOSS Stuff worked fine for me. If you have a set of PosiDrive Bits you can take the side of the windshield frame apart and the gasket slips right in place no muss no fuss. Just be sure and use a PosiDrive Bit to get it apart so it doesn't strip the head.
Tip: cut a notch into shims so you can slide them back in place once you've got the 4 bolts started. Much easier if you need to do that by yourself.
I ordered mine from VB and it was fine - I suspect they all come from the same source. There have been issues with the rubber covering the edge of the wipers but I think it is earlier models not later 3 wiper cars. I have a hunch that over the years there was more than one size but in reproduction there is only one. Bottom line, it will fit just fine and if you are doubt go to MacGregor in Dundas Ontario
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.