Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hi All,
Does anyone know where to get the spec's to give to a machine shop to grind a BJ7 cam to a BJ8? I guess you would call it the cam profile, which shows where the valve opens and closes as well as the height of the various cams.
The Workshop Manual shows the points where the valves open and close, but no height.
By the way, is there a <u> </u> better <u> </u> profile out there than the BJ8?
Does anyone know where to get the spec's to give to a machine shop to grind a BJ7 cam to a BJ8? I guess you would call it the cam profile, which shows where the valve opens and closes as well as the height of the various cams.
The Workshop Manual shows the points where the valves open and close, but no height.
By the way, is there a <u> </u> better <u> </u> profile out there than the BJ8?
