TR4/4A Where to buy this aluminium extrusion?

[malbaby]

Currently modifying the door glass weatherseal on an aftermarket f/g surrey top.
Looking for some alloy channel...see attached pics.

 

[TomMull]

Try your sailboat rigger, e.g:
https://www.downwindmarine.com/Ronstan-RC8190-Internal-C-Track-Series-19-Channel-Width-5-8-p-90891033.html

 

[malbaby]

Thanks Tom.....the profile that I require is similar to the channel that is attached to the windshield posts.

 

[mallard]

It looks like the channel found on the TR6 convertible top. It holds the seal at the top of the door glass. part# 712400 or 621281 Or the seal on the front rail at the top 713036

Sorry TRF part numbers

 

[malbaby]

This is the C channel that I require as seen in attached pic.
The channel is attached to the windshield frame post to hold the rubber seal.

 

[3798j]

That looks so similar to the "A" pillar weatherstrip channel used on the 63-67 Corvette convertible. Take a look at this venders photos of one. https://www.ebay.com/itm/1963-1967-...ws-/371681462216?_trksid=p2141725.m3641.l6368

 

[TR4nut]

If you can use steel as you show on the A post picture, I believe that is still available from the normal suppliers. Part number 750163 for example on the Moss-Europe site is the steel retainer for the backlight. Moss in the US has part number 802-060 in 24" lengths.

 

[malbaby]

Thanks...I have ordered channels from Moss.