• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Wheel Lug Nut Torque for a TR3?

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Offline
What's the recommended lug nut torque for a TR3 and would it be different if using American Racing Mag wheels? I would remind all Brit sport car owners to check the lug nut torque on all wheels before putting their cars on the road this Spring. Most find that they are often surprisingly loose.
 
I would think 55-65 ft-lbs would be the correct range. I usually do mine at 60 to split the difference. Cheers, Mike
 
The book value for TR3-4 steel wheels is 45-55 ftlb. If you have wire wheel adapters, 65 ftlb.

ISTR the book gives quite a bit higher value for Stags with factory alloy wheels (100 ftlb), but I don't know if that would apply to alloys on a TR3 or not.
 
Back
Top