• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Wheel bearings...

Share this page

Nunyas

Nunyas

Yoda
Country flag
Offline
I just got a new set of front wheel bearings for my '76 'B. I noticed that they aren't "tapered". This seems kind of odd. The only other car I owned that didn't have tapered front wheel bearings was a 1980 Suzuki Jimny while I was in Okinawa, but that thing must have weighed half of what an MGB weighs and it only had a 550CC engine in it.

So, i guess why non-tapered front wheel bearings? Don't the tapered bearings provide more lateral force strength?
 
The bearings should be tapered. Perhaps you are looking at them in their races. The set that I got came with inner and outer bearing and new races. The bearings were packaged in the races so they apper to not be tapered unless you take them out of the package and out of the races. Also note when taking your old bearings off that there are oil seals at the back of the hub. These look like races, and you should note the orientation of the oil seals when you take the hubs apart and don't forget to put them back in or you can mess all kinds of things up. Hope this helps =)

-D.
 
well I'll be. you're right they are tapered... not very much though... but they are none the less. *shakes head in disgust* the stupid things i think and say sometimes... if i had a penny everytime i did something like that....
 
Back
Top