• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 What's normal oil pressure for a TR6?

Share this page

Webb Sledge

Webb Sledge

Jedi Warrior
Offline
When I start it, and the engine is cold, the oil pressure is at ~60psi at idle, but when the engine warms up, it drops to ~23psi at idle. I'm using 10W-30 oil. Is this normal? It seems a little low.
 
What does it go back to when normal driving or does it stay at 23 psi?
 
[ QUOTE ]
I like bossing the younger guys around without giving a reason why

[/ QUOTE ]

That's okay until he gets married, then it will be HER job.

Webb - That oil pressure sounds normal for the weight oil you are using. As noted, for the climate you drive in 20W50 is a more likely choice and will raise your pressure a bit.
 
According to the operating manual - oil pressure at 2000 rpm under normal op cond should be 45-65 lbs/sqin. I agree with the others try 20/50 oil as it will resist heat. Be careful not to run the heavier grade oil in cool/cold regions.
 
Yes, the oil pressure raises signifigantly (back to about 55-60) when any throttle is given at all. Well thats good news. I sure didn't want to hear that my engine is seriously messed up!
 
[ QUOTE ]
I like bossing the younger guys around without giving a reason why /ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

Thanks Boxo. I appreciate that... /ubbthreads/images/graemlins/wink.gif
 
Back
Top