Generator
Fuel pump, mechanical
Fuel pump, electric
Water pump w/pulley
Water pump pulley-puller
Complete dizzy with wires
U-joint
Inline spark tester
Stromberg diaphram
Starting crank
Radiator hoses
Asst'd hose clamps
5/16” & 1/4" Fuel Hoses
Points & condenser on base plate
4 spark plugs
Coil
Voltage regulator
Fuses
Extra wire
2 pair of long jumper wires w/ alligator clips
Electrical tape
Small bulbs
Fan belt
Brake fluid
JB Weld
Radiator stop-leak powder
Gasket material (2 types)
Spare snaps & LTDs & install tools
Hylomar
Lots of oil
2 hose clamping pliers
Several pairs of rubber gloves
Mechanix gloves
Spoke wrench
Emergency fan belt
Selected Allen wrenches
Nylon rope
Bungee cords
First aid kit (w/ lots of BandAids)
1/4, 3/8 & 1/2" socket sets
Phillips screwdrivers
Flat screwdrivers
Offset screwdriver
Pry bar
Needle nose pliers
Regular pliers
Diagonal cutters
Hemostats
.015 feeler gauge
Spark plug socket
3/8, 7/16, 1/2, 9/16 & 5/8” combination wrenches
Stubby screwdrivers (usual + tiny)
Emery board
SU jet wrench
Stromberg jet tool (1 shilling coin)
Ball peen hammer
Brake adjusting wrench
1/2” breaker bar
Nylon wire ties
Duct Tape
Fire Extinguisher
Shop manual
Everything fits in 3 small cloth bags (Harbor Freight) for short drives plus an aluminum suitcase (HF also) with the long-drive stuff.
Some think I carry too much until they have a problem... then they are looking for me. I end up using this stuff much more on others' cars than my own.