What type of SUs are these?

[TR4A_IRS]

And does anybody want them?

https://seattle.craigslist.org/see/pts/1060021547.html

I would be willing to pick them up and mail them to you if you are interested.

 

[rlandrum]

Hard to say, but I'd guess H2. The nut on top of the fuel bowl is 9/16. The carb opening looks to be about 2x the width of the nut. H2s are 1-1/4. H4s are 1-1/2, H6s are 1-3/4.

 

[Moseso]

They look very old. The simple intake manifold looks like something out of an early MG.

 

[Andrew Mace]

I also vote H2. I first thought that they might be H1s, but the manifold doesn't look right for either the 948 Herald or the early Bugeye Sprite.

 

[dklawson]

Definitely H series SUs, it's hard to make a good guess of their size from the photo but probably H2s as Rlandrum said.

 

[WedgeWorks]

They are pre-MGA just from the tops of the float bowls and the choke levers on the underside of the carbs.

 

[TR3driver]

Where are the float bowl vents?

BTW, that nut is not 9/16", it's 1/4 Whitworth or 0.525"

 

[Andrew Mace]

Where are the float bowl vents?

MIA, AFAIK!

They should be off the bolt atop the float bowls, as seen here.

 

[martx-5]

...

BTW, that nut is not 9/16", it's 1/4 Whitworth or 0.525"

For those interested in Whitworth across the flats dimensions.