• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

What Needle Used for HIF-6 on 1500

Share this page

Thor

Thor

Senior Member
Offline
Is anyone running their 1500cc with a single HIF-6 SU carb and if so what needle are you using? My 1500cc is stock and currently it has a BAL needle in it. I am trying to get a more near match to the 1500 as the BAL was used in a double setup for a Volvo HIF-6. Hoping someone can help. Thanks.
 
Since I haven't gotten any replies I thought I would at least add to the message what I have found doing my own research.

The nearest SU needles appear to be the "BAS" and "BEL". The "BAS" was used on a Austin Maxi 1495cc, WHILE the "BEL" was suggested by Joe Curto. I am not sure what engine used that but since he recommended it I will go ahead and try this one first. It's the leaner of the two.

I also found you can order a CO2 Exhaust Analyzer for about $100 less through Harbor Freight in case anyone is needing to purchase one.
I am trying to keep a record of my progress at https://www.visn2.com/mgmidget.html for others to refer to in the future.
 
I used a BBQ on a hot 1275. It worked OK but I very quickly went back to my Weber DCOE so I do not have any long term results with the HIF6.

Frank
 
Back
Top