• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

What does this go? 59 BE

Share this page

Bruce_B

Bruce_B

Jedi Warrior
Offline
Almost done with brake lines and such...but can't remember this one. I have switched to a dual brake lines,dual cylinders - where did this go? - the line where the coils in it?
 

Attachments

  • 12900.jpg
    12900.jpg
    35.3 KB · Views: 176
Temperature guage sensor, probably to the right side of the rad if 948, if 1275 then to head or rad.
 
The fatter line with the coils goes to the slave cylinder.

The thinner with the coils goes to the block and the oil pressure gauage.
 
So that's why I don't need the fat one with coils - I've got the Datsun 5 speed kit with a new clutch slave cylinder. And of course, the dual MCs.

Thanks...
 
I'm curious. Since you're putting in the larger master cylinder, what will you do to make your wipers work? I haven't figured that part out yet on my brake upgrade.

Thanks,
Walter
 
Walter...I'm going to move it over to the right a little bit. At least that's the plane. Saw a picture of it somewhere.
 
Back
Top