Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TexasKnucklehead
Jedi Knight
Offline
On my 59 TR3, behind each seat, on the floor, roughly centered between the rear fender and the drive shaft tunnel, is a hole, and on the under side of the floor pan of that hole is a caged 1/4-24 nut. What are they for?
Perhaps they are mounting points for the occasional rear seat?
I puzzled over a similar set of caged nuts on the passenger foot well of the front bulkhead until I realized that even though the blanking plates had been removed for the brake/clutch pedal box, the mounting points for the gas pedal of right hand steered cars remained.
Perhaps they are mounting points for the occasional rear seat?
I puzzled over a similar set of caged nuts on the passenger foot well of the front bulkhead until I realized that even though the blanking plates had been removed for the brake/clutch pedal box, the mounting points for the gas pedal of right hand steered cars remained.
