• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

weber vacumn line connection for BMW

Share this page

eejay56

eejay56

Jedi Warrior
Offline
My sons beemer has two vacuum lines to the distributor, one is connected under the choke unit on the Weber DGV. The other is missing. Where should it connect?
 
It is a 79 320i converted to a Weber DGV carb. The dizzy has vacuum advance and vacuum retard lines. Currently only one is hooked up.
 
Is it a Bosch dizzy?? The port on the back side of the
vacuum can should hook to a manifold source, the front
side should hook to the port near the idle enrichment
screw...

SteveL
 
Back
Top