• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

weber dgv tuning help

Share this page

S

SANdMAN_the

Member
Offline
my dgv upgrade kit finally came in the mail and is installed on my 69 midget. i was able to tune the idle so that it's smooth, but when the rpms get up to about 2k, there's a lot of hesitation and stumbling.

my guess is i'm running too rich. but where do i adjust this on my carb? my weber didn't come with a manual or diagram pointing out where the rest of the adjustments are other than the idle mixture and idle speed screws.

thanks,
john
 
well, i know i read it in haynes at least several times before i believed it, but i guess they really do mean it when they say "blame the ignition system before blaming the carb".

it turns out after sanding down the points and tightening up the condenser, she idles much much smoother and the hesitation has all but completely disappeared :smile:

i suspect i'll still need a smaller idle jet, but the car is definately driveable now.

john
 
Back
Top