• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Water Temp Gauge

Share this page

BOBBYR

BOBBYR

Jedi Trainee
Country flag
Offline
Hi Guys,
I hope you all are having a good New Year. I know that there are many different gauge rebuilding shops, so the first thought you might have is: Boy! Is this guy cheap? And you might be right. Anyway, now that we have established that, I was wondering if anyone has ever calibrated a smith water temp. gauge? I know the capillary tube has never leaked and I'm just curious if there is a quick fix, instead of sending this gauge out for few months. I appreciate your help and I also thank you for not calling me a cheapskate.Have a great day.
Bobby R
 
Boiling water is 100 deg C. or 212 F. Plop the probe into a pot of just boiled water and the gage should read pretty close to that, if you pre-heat the probe with a different pot of boiling water. If you are really talking about calibrating the gage, then I haven't a clue. I think it is just a Bourdon tube inside, so I imagine the way that gets done is to adjust the needle so it hits the calibration points you've selected. I think I might have an old gage in the box of gage pieces and parts. I'll look to see if there is an adjusting mechanism, but I don't think so.
 
Bobby, not cheap , practical. Hope it works out . I have to send a Jaeger guage in to Nisonger to have a new tube installed , $135 , jeeesh. Kevin
 
Hi Bobby,

A while back I acquired an article showing how to repair the tube leading from the gauge to the bulb that included the following passage on calibration. Although this article was not for a Healey, it did seem quite accurate when I compared its description to my own gauge. Hope it helps.

Temperature Gauge Head Calibration
“The gauge head is a Bourdon tube connected to the indicator by a linkage. The Bourdon tube is simply a flattened tube rolled into a coil. As pressure is applied the tube slightly unwinds. When the pressure is removed, the coiled tube returns to its original position.

Adjustment is made by bringing the sensing bulb to a known temperature by placing it in boiling water (212°F) then bending the linkage that connects the Bourdon tube to the indicator. Do not bend the Bourdon tube itself.”

Again, I want to reiterate that this excerpt did not come from a Healey or Smiths document.

Hope it helps,
Ray (64BJ8P1)
 
Hi Guys,
Thanks guys for getting back to me on this. Ray, You have supplied me with the answer I need. I was wondering if the tube was supposed to be bent. I would think this is going to be very easy to do. Again guys, I appreciate your help.Hey Ray, If you could, would you send me the link for that article?
Bobby R
 
Back
Top